Extruder
Specially designed extrusion screw with new generation homogenization and mixing sections for optimized melt quality for wide range of PP polymers.
Melt Pump
Melt spinning pump ensures uniform melt delivery at steady pressure. The electrically heated die head is specially designed to optimize heat transfer and reduce energy losses.
Spin Pack
The spin packs assure high value spun dyed yarn production and ease of operation. The filaments coming out of spinnerets are cooled by specially designed Quench zone with variable air flow rate.
Spin Finish
The dual nozzle type spin-finish application system ensures uniform spin-finish distribution over the filaments as spin-finish liquid is supplied by gear pump.
Godets
Draw zone consist of five heated godets with separator rolls. Each godet has individual motor and inverter, enabling flexibility in process optimization.
Winder
Easy to operate precision winders
with Automatic Changeover at preset
length or diameter of bobbin, less
energy, labour and minimal wastage.
HMI Control
PLC based process control system.
Product Range |
| Denier Range |
600 to 1200 |
| Denier Per Filament (dpf) |
Upto 10 |
| No. of Filaments |
90/120/144 |
Extruder Unit |
| Screw Diameter |
30 mm |
| Screw L/D Ratio |
28:1 |
| Max. Melt Output |
20 kg/hr |
| Max. Speed |
220 rpm |
Drawing Unit
|
| No. of Godet |
5 |
| Temperature Range |
60 to 180 degree Celsius |
| Maximum Speed |
1500 m/min |
Winding Unit
|
| Winder Head |
2 (Automatic) |
| Max. Take-up Speed |
1200 m/min |
Spinning Unit |
| No. of Spinnerette |
2 |
Spin-Finish Unit |
| Type of Applicator |
Dual Nozzle |
Quenching Unit |
| Quench Medium |
Cross-flow Air Cooling |
Relaxation Unit |
| No. of Godet |
1 |
| Maximum Speed |
1500 m/min |
Installed Power
|
| Installed Power |
45 kW |
| Avg. Power consume |
12 kW |
Space Required |
| L x W x H |
3.4 m x 2.5 m x 4.5 m |
* Depends on yarn specifications.
Specifications subject to change without prior notice due to
continuous developments. The details are indicative and not
binding.
