Lohia's nova represents a new generation of looms for weaving tubular or flat fabric from PP/HDPE tapes. In these, the tension of warp tapes is regulated by load cell controlled positive warp in-feed system which controls the speed of the inlet rollers during weaving as per set tension. The fabric roll winder also has a load cell assisted drive to ensure uniform winding tension of the fabric throughout the build.
Available in two configurations of 6 and 10 shuttles, these looms offer solutions for weaving light weight as well as dense fabrics, of varying widths and a wide variety of end applications.
- Higher working speed
- Excellent weaving quality
- Low energy consumption
- Low maintenance costs
- Operator friendly design
Technical Specifications
| MODEL |
nova 6
|
nova 6 SJ |
nova 6 HS |
nova 62
|
| Working width- Double flat |
30 to 90 cm |
30 to 90 cm |
30 to 85 cm |
80 to 130 cm |
| No. of shuttles/loom |
6 |
6 |
6 |
6 |
| Weft insertion rate (max.) |
1100 ppm* |
500 ppm* |
1200 ppm* |
930 ppm* |
| Warp/Weft core internal diameter |
35 mm** |
35 mm** |
35 mm** |
35 mm** |
| Warp/Weft core length |
218 mm** |
218 mm** |
218 mm** |
218 mm** |
| Warp bobbin diameter (max.) |
160 mm** |
160 mm** |
180 mm** |
130 mm** |
| Weft bobbin diameter (max.) |
115 mm |
115 mm |
115 mm |
115 mm |
| No. of tapes (LF/HF) |
576/720 |
576/720 |
588 |
1008/1176 |
| Fabric roll diameter (max.) |
1500 mm |
1500 mm |
1200 mm |
1200 mm |
| MODEL |
nova 8
|
nova 10
|
nova 82 (HF)
|
nova 12
|
| Working width- Double flat |
100 to 160 cm |
170 to 225 cm |
150 to 200 cm |
250 to 295 cm |
| No. of shuttles/loom |
8 |
10 |
8 |
12 |
| Weft insertion rate (max.) |
760 ppm* |
700 ppm* |
650 ppm* |
650 ppm* |
| Warp/Weft core internal diameter |
35 mm** |
35 mm** |
35 mm ppm** |
35 mm** |
| Warp/Weft core length |
218 mm** |
218 mm** |
218 mm** |
218 mm** |
| Warp bobbin diameter (max.) |
130 mm** |
130 mm** |
130 mm** |
130 mm** |
| Weft bobbin diameter (max.) |
115 mm |
115 mm |
115 mm |
115 mm |
| No. of tapes (LF/HF) |
1344/1920# |
1680/2520# |
2240 |
2016/2880 |
| Fabric roll diameter (max.) |
1200 mm |
1200 mm |
1200 mm |
1200 mm |
#LF version for light fabrics and HF version for heavy fabrics.
* Actual speed depends upon reed version, fabric width, construction, tape specifications quality of tapes and winding.
** Special versions on request.
