nova series
Change Language

Lohia

Slide 0 Slide 1 Slide 2 Slide 3 Slide 4

nova series

Lohia's nova represents a new generation of looms for weaving tubular or flat fabric from PP/HDPE tapes. In these, the tension of warp tapes is regulated by load cell controlled positive warp in-feed system which controls the speed of the inlet rollers during weaving as per set tension. The fabric roll winder also has a load cell assisted drive to ensure uniform winding tension of the fabric throughout the build.

Available in two configurations of 6 and 10 shuttles, these looms offer solutions for weaving light weight as well as dense fabrics, of varying widths and a wide variety of end applications.

  • Higher working speed
  • Excellent weaving quality
  • Low energy consumption
  • Low maintenance costs
  • Operator friendly design

Technical Specifications

MODEL
nova
6		 nova 6 SJ nova 6 HS
nova 62
nova
8
nova 10
nova 82 (HF)
nova 12 (LF)
Working width- Double flat 30 to 90 cm 30 to 90 cm 30 to 85 cm 80 to 130 cm 100 to 160 cm 170 to 225 cm 150 to 200 cm 250 to 295 cm
No. of shuttles/loom 6 6 6 6 8 10 8 12
Weft insertion rate (max.) 1100 ppm* 500 ppm* 1200 ppm* 930 ppm* 760 ppm* 700 ppm* 650 ppm* 650 ppm*
Warp/Weft core internal diameter 35 mm** 35 mm** 35 mm** 35 mm** 35 mm** 35 mm** 35 mm ppm** 35 mm**
Warp/Weft core length 218 mm** 218 mm** 218 mm** 218 mm** 218 mm** 218 mm** 218 mm** 218 mm**
Warp bobbin diameter (max.) 160 mm** 160 mm** 180 mm** 130 mm** 130 mm** 130 mm** 130 mm** 130 mm**
Weft bobbin diameter (max.) 115 mm 115 mm 115 mm 115 mm 115 mm 115 mm 115 mm 115 mm
No. of tapes (LF/HF) 576/720

 576/720

 588 1008/1176 1344/1920# 1680/2520# 2240 2016
Fabric roll diameter (max.) 1500 mm 1500 mm 1200 mm 1200 mm 1200 mm 1200 mm 1200 mm 1200 mm

#LF version for light fabrics and HF version for heavy fabrics.
* Actual speed depends upon reed version, fabric width, construction, tape specifications quality of tapes and winding.
** Special versions on request.

Copyright LohiaGroup All Rights Reserved